Jones H-Bar SG Loop Aluminum – Jones Bikes, Jones H-Bar Butted Loop Aluminum – Jones Bikes, Jones H-Bar SG Loop Aluminum – Jones Bikes, Handlebar Conversion to the Jones Loop-H Bar|Handlebars …
All H-bars are for a 31.8 stem and the crossbar is now tapered and butted with a 31.8 mm clamp area. The grip tubes on the aluminum version are also butted for strength and weight savings. All H-Bars have a standard 22.2mm diameter grip area. Try wrapping the crossbar with bartape!, 660mm H-Bars require grips that are approximately 165mm/6.5” long, and 710mm H-Bars require grips that are approximately 205mm/8” long. The Jones H-Grips come in just the right length to fit your H-Bar, and are what we recommend! The Jones H-Bar works best when the main to the bar than you might normally in order to, All Jones H-Bars use a 31.8mm stem clamp diameter, 22.2mm clamp size for controls (standard mountain bike style). The entire front loop has a 22.2mm diameter. The Loop H-Bar has the same hand, stem and brake lever position as the original H-Bar but the cross bar sweeps forward to allow the levers to go behind the cross bar instead of in front.
It’s a great way to get the amazing feel of a Jones H-Bar even if you don’t need the whole range of positions and mounting locations. Most material/style combinations are.
All Jones H-Bars use a 31.8mm stem clamp diameter, 22.2mm clamp size for controls (standard mountain bike style). The entire front loop has a 22.2mm diameter. The Loop H-Bar has the same hand, stem and brake lever position as the original H-Bar but the cross bar sweeps forward to allow the levers to go behind the cross bar instead of in front.
Jones Sealed Cartridge H-Set. Durable and simple with with readily available replaceable cartridge bearings. Excellent tolerances. Compression ring design is easy to install and slide on the steerer tube. Quality materials throughout. Seatpost : Jones Spec. straight forged aluminum alloy anodized back. 27.2mm x 400mm. This is a reliable, easy to adjust seatpost.
1/8/2015 · The Loop H – Bar treads this fine line better than perhaps any other handlebar available. Your list of necessary parts will vary, but here are the parts I needed to effect the conversion. – Jones Loop H – Bar , 710mm – Thomson X.4 Stem, 90mm x 0-deg – Paul Thumbies for Shimano shifters, 22.2 clamp – Shimano BL-R550 canti levers, 2/29/2016 · Hi all, I’ve built up a bikepacking rig for TD2016 with Jones loop bars . I’m just wondering what range of stem lengths people are using? Currently I’ve got a 50mm stem to get a more upright position, but I’m thinking of moving up to maybe a 60 or 70mm length to get a little bit more forward.
7/28/2018 · I have a Jones ‘ H – Bar on my expedition touring bicycle and would like to put one on my XDuro but I think some of the cables if not all are too short (brakes, monitor, controller). Has anyone actually put one on an XDuro and if so did you have to put on new cables.
